Audio Technica AT-LP60XBT-BK Fully Automatic Wireless Belt-Drive Turntable (Black)

Cut the cord, keep the vinyl.

The AT-LP60XBT gives you all the great features of the redesigned AT-LP60X fully automatic belt-drive stereo turntable with the added convenience of Bluetoothr wireless connectivity. So you can set up your turntable in one room and listen to it in another without having to run a bunch of cables.

The turntable pairs with speakers, headphones or other wireless devices. With its CSR BT chipset, the turntable is even able to connect to devices that support the aptX codec, which offers much-improved sound quality over the standard SBC code.

Of course, the AT-LP60XBT can also be operated just like a regular turntable with a traditional wired connection. Either way - wired or wireless - you get outstanding audio with the ease of automatic operation controlled by front-panel start, stop and tonearm lift buttons.

Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the AT-LP60XBT's Dual MagnetT cartridge with replaceable stylus. The cartridge is integrated into the headshell for assured performance and ease of setup.

The AT-LP60XBT plays both 33-1/3 and 45 RPM records and comes with a 45 RPM adapter, a detachable dual RCA output cable (for wired connection) and a removable hinged dust cover.

Features:

• High-fidelity audio with Bluetooth wireless technology
• Connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology or to wired audio systems and powered speakers via included dual RCA output cable
• Compatible with aptX codec
• Fully automatic operation with two speeds: 33-1/3 and 45 RPM
• Anti-resonance, die-cast aluminum platter
• Redesigned tonearm base and headshell for improved tracking and reduced resonance
• Integral Dual Moving MagnetT phono cartridge with replaceable diamond stylus (ATN3600L)
• AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
• Built-in switchable phono pre-amplifier for phono- or line-level output
• Includes: detachable RCA output cable (3.5 mm male to dual RCA male), 45 RPM adapter, and removable hinged dust cover

Specs:

• Type: Belt drive turntable, fully automatic
• Motor: DC servo-controlled
• Drive Method: Belt-drive
• Speeds: 33-1/3 RPM, 45 RPM
• Turntable Platter: Aluminum
• Wow and Flutter: Less than 0.25% (WTD) @ 3 kHz
• Signal-to-Noise Ratio: >50 dB (DIN-B)
• Output Level: Pre-amp "PHONO": 2.5 mV nominal at 1 kHz, 5 cm/sec
• Output Level: Pre-amp "LINE" 150 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain: 36 dB nominal, RIAA equalized
• Power Supply Requirements: 100 to 240V, 50/60 Hz,0.6 A Max.
• Dimensions: 359.5 mm (14.15") W x 97.5 mm (3.84") H x 373.3 mm (14.70") D
• Weight: 2.6 kg (5.73 lbs.)
• Accessories Included: Dust cover, felt mat, platter (with drive belt), 45 RPM adapter, RCA audio cable (approx. 1.2 m (3.9')), AC adapter (approx. 1.5 m (4.9'))
• AC Adapter: 12 V, 2 A
• Replacement Stylus: ATN3600L
• Communication System: Bluetooth Version 5.0
• Maximum Communication Range: Line of sight - approx. 10 m (33')
• Compatible Bluetooth Profile: A2DP
• Support Codec: SBC, Qualcomm aptX

Audio Technica AT-LP60X-BK Fully Automatic Belt-Drive Turntable (Black)

Whether you're just getting into records, rediscovering a record collection long since buried away or simply adding a turntable to complete your system, the AT-LP60X fully automatic belt-drive turntable is an excellent choice. This affordable, easy-to-use turntable plays both 33-1/3 and 45 RPM records and, with its built-in switchable phono preamp, can be connected directly to your home stereo, powered speakers, computer and other components, whether they have a dedicated phono input or not.

Product Features

Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM

Anti-resonance, die-cast aluminum platter

Redesigned tonearm base and headshell for improved tracking and reduced resonance

Integral Dual MagnetT phono cartridge with replaceable diamond stylus (ATN3600L)

AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain

Built-in switchable phono pre-amplifier for phono- or line-level output

Includes: detachable RCA output cable (3.5 mm male to dual RCA male), 45 RPM adapter, and removable hinged dust cover

• 100 to 240 V, 50/60 Hz, 0.6 A Max

Audio Technica AT-LP120XUSB-BK Direct-Drive Analog & USB Turntable (Black)

This update of the AT-LP120-USB turntable features a new DC servo direct-drive motor, along with adjustable dynamic anti-skate control and selectable phono preamplifier. The fully manual turntable plays 33-1/3, 45, and 78 RPM records and is equipped with a USB output that allows direct connection to your computer. Just download the free Mac- and PC-compatible Audacity recording software (or software of your choice) and start converting your records to digital audio files. But in addition to the USB output,

Product Features

Direct-drive, DC servo motor

Fully manual operation

Adjustable dynamic anti-skate control

Selectable 33/45/78 RPM speeds

Professional-grade anti-resonance, die-cast aluminum platter with felt mat

AT-HS6 universal ½"-mount headshell and AT-VM95E Dual MagnetT phono cartridge with 0.3 x 0.7 mil elliptical stylus

AT-VM95E cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application

Balanced S-shaped tonearm with hydraulically damped lift control and lockable rest

Built-in switchable phono pre-amplifier for phono- or line-level output

Stroboscopic platter with speed indicator

Variable pitch control with quartz speed lock

Removable plug-type target light for easier cueing in low light

Damped base construction for reduced low-frequency feedback coloration

AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain

Convert your vinyl records to digital audio files by downloading and using the free Mac- and PC-compatible Audacity recording software (or software of your choice)

Includes: USB cable, detachable RCA output cable (dual RCA male to dual RCA male), AC adapter, 45 RPM adapter, counterweight, felt mat, and removable hinged dust cover

Available in black (AT-LP120XUSB-BK) and silver (AT-LP120XUSB-SV)

• 100 to 240 V, 50/60 Hz, 1.5A Max

Audio Technica AT-LP60X-GM Fully Automatic Belt-Drive Turntable (Gun Metal/Black)

Whether you're just getting into records, rediscovering a record collection long since buried away or simply adding a turntable to complete your system, the AT-LP60X fully automatic belt-drive turntable is an excellent choice.

This affordable, easy-to-use turntable plays both 33-1/3 and 45 RPM records and, with its built-in switchable phono preamp, can be connected directly to your home stereo, powered speakers, computer and other components, whether they have a dedicated phono input or not.

An update of the popular AT-LP60, the ATLP60X features a redesigned tonearm base and headshell to improve tracking and reduce resonance. Noise is further reduced by the inclusion of an AC adapter that moves the AC/DC conversion outside of the chassis where its impact on the signal chain is limited.

Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the AT-LP60X's Dual MagnetT cartridge with replaceable stylus. The cartridge is integrated into the headshell for assured performance and ease of setup.

The turntable comes with a detachable RCA output cable (3.5 mm male to dual RCA male), 45 RPM adapter, and a removable hinged dust cover.

Features:

• Experience the high-fidelity audio of vinyl
• Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
• Anti-resonance, die-cast aluminum platter
• Redesigned tonearm base and headshell for improved tracking and reduced resonance
• Integral Dual MagnetT phono cartridge with replaceable diamond stylus (ATN3600L)
• AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
• Built-in switchable phono pre-amplifier for phono- or line-level output
• Includes: detachable RCA output cable (3.5 mm male to dual RCA male), 45 RPM adapter, and removable hinged dust cover

Specs:

• Type: Belt drive turntable, fully automatic
• Motor: DC servo-controlled
• Drive Method: Belt-drive
• Speeds: 33-1/3 RPM, 45 RPM
• Turntable Platter: Aluminum
• Wow and Flutter: Less than 0.25% (WTD) @ 3 kHz
• Signal-to-Noise Ratio: >50 dB (DIN-B)
• Output Level: Pre-amp "PHONO": 2.5 mV nominal at 1 kHz, 5 cm/sec
• Output Level: Pre-amp "LINE" 150 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain: 36 dB nominal, RIAA equalized
• Power Supply Requirements: 100 to 240 V, 50/60 Hz, 0.6 A Max.
• Dimensions: 359.5 mm (14.15") W x 97.5 mm (3.84") H x 373.3 mm (14.70") D
• Weight: 2.6 kg (5.73 lbs)
• Accessories Included: Dust cover, Felt mat, Platter (with drive belt), 45 RPM adapter, RCA audio cable (approx. 1.2 m (3.9')), AC adapter (approx. 1.5 m (4.9'))
• Notes: AC adapter: 12 V, 2 A, Replacement Stylus: ATN3600L

Audio Technica AT-LP60XBT-USB-BK Bluetooth Wireless Turntable USB Automatic Belt Drive (Black)

It's time to upgrade your sound!

The AT-LP60XBTUSB-BK gives you all the great features of the redesigned AT-LP60X fully automatic belt-drive stereo turntable with the added convenience of Bluetoothr wireless connectivity and USB recording capability.

The LP60XBT can connect to devices with Bluetoothr technology that support the high-quality Qualcommr aptXT audio codec, giving you exceptional sound from the wireless connection.

Product features

• High-fidelity audio with Bluetooth wireless technology
• Connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology or to wired audio systems and powered speakers via included dual RCA output cable
• Compatible with aptX codec
• Fully automatic operation with two speeds: 33-1/3 and 45 RPM
• Anti-resonance, die-cast aluminum platter
• Redesigned tonearm base and headshell for improved tracking and reduced resonance
• Integral Dual Moving MagnetT phono cartridge with replaceable diamond stylus (ATN3600L)
• AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chainAluminum
• Built-in switchable phono pre-amplifier for phono- or line-level output

Specs:

• Type: Belt drive turntable, fully automatic
• Motor: DC servo-controlled
• Drive Method: Belt-drive
• Speeds: 33-1/3 RPM, 45 RPM
• Turntable Platter: Aluminum
• Wow and Flutter: Less than 0.25% (WTD) @ 3 kHz
• Signal-to-Noise Ratio: >50 dB (DIN-B)
• Output Level: Pre-amp "PHONO": 2.5 mV nominal at 1 kHz, 5 cm/sec
• Output Level: Pre-amp "LINE" 150 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain: 36 dB nominal, RIAA equalized
• Power Supply Requirements: 100 to 240V, 50/60 Hz,0.6 A Max.
• Dimensions: 359.5 mm (14.15") W x 97.5 mm (3.84") H x 373.3 mm (14.70") D
• Weight: 2.6 kg (5.73 lbs.)
• Accessories Included: Dust cover, felt mat, platter (with drive belt), 45 RPM adapter, RCA audio cable (approx. 1.2 m (3.9')), AC adapter (approx. 1.5 m (4.9'))
• AC Adapter: 12 V, 2 A
• Replacement Stylus: ATN3600L
• Communication System: Bluetooth Version 5.0
• Maximum Communication Range: Line of sight - approx. 10 m (33')
• Compatible Bluetooth Profile: A2DP
• Support Codec: SBC, Qualcomm aptX

ITEM DOES NOT HAVE A COLOR RETAIL DISPLAY BOX. Product has a brown display box with black image of the turntable and model number.

Audio Technica AT-LPW40WN Fully Manual Belt-Drive Turntable (Walnut)

ITEM DOES NOT HAVE A COLOR RETAIL DISPLAY BOX. Product has a brown display box with black image of the turntable and model number.

The AT-LPW40WN is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. It features an aesthetically pleasing anti-resonance MDF (medium density fiberboard) plinth with simulated walnut wood veneer to limit low-frequency acoustical feedback and a sensor-monitored motor to ensure accurate platter rotation speeds at 33-1/3 and 45 RPM.

• 100-240 V, 50/60 Hz, 0.5 A Max.

Limited Quanities - Orders may be reduced based on product availability.

Audio Technica AT-SB727-BK Sound Burger Bluetooth Turntable Portable Black

To celebrate the 60th Anniversary of Audio-Technica, the fan-favorite Sound Burger, makes a welcome return after 40 years!

The AT-SB727 retains the classic, lightweight design of the 1980s model, while incorporating modern updates like Bluetoothr wireless connectivity, a lithium-ion battery, and a USB-C charging cable, making it perfect for parties, picnics, or compact living spaces.

The Sound Burger offers high-quality sound reproduction with a belt-drive system that plays 33-? and 45 RPM records. Updated with Bluetooth capabilities, this turntable can play your favorite vinyl records wirelessly for up to 12 hours. Enjoy a nostalgic, wired listening experience with the included audio cable.

Designed for both portability and stability, the tonearm employs a dynamic balance system in which stylus pressure is applied through a spring. The turntable also maintains stable rotation thanks to the high-precision DC motor. This unique turntable features a die-cast aluminum alloy platter with damping design and a replaceable ATN3600L stylus (sold separately).

Features:

• Belt-driven portable turntable
• Plays 33-1/3 and 45 RPM records
• Uses a high-precision DC motor that maintains stable rotation
• Die-cast aluminum alloy platter with damping design
• 12-hour battery
• Replaceable ATN3600L stylus

Included Accessories:

• 45 RPM adapter
• RCA audio cable (3.5 mm male to dual RCA male)
• USB cable for charging (USB Type-A / USB Type-CT)

Turntable Specifications:

• Power Supply: DC 3.6 V lithium-ion battery
• Drive Method: Belt-drive
• Motor: DC servo motor
• Speeds: 33-1/3 RPM, 45 RPM
• Turntable Platter: Aluminum
• Wow and Flutter: < 0.25 % (WTD) at 3 kHz
• Signal-to-Noise Ratio: > 50dB (DIN-B)
• Cartridge Type: VM
• Output Levels: 150 mV nominal at 1 kHz, 5 cm/sec (No phono-output)
• Phono Pre-Amp Gain: 36 dB nominal, RIAA equalized
• Charging Specifications: 5 V - 0.5 A
• Power Consumption: 1.5 W (when charging)
• Charging Time: Approx. 12 hours*
• Operating Time: Approx. 12 hours*
• Input Jack: USB Type-C jack
• Dimensions: 100 mm (3.9") x 290 mm (11") x 70 mm (2.8") (WxDxH)
• Weight: Approx. 900 g (32 oz)

* The figures above depend on the operating conditions.

Communication Specifications:

• Communication System: Bluetooth version 5.2
• Maximum RF Output: 10 mW EIRP
• Maximum Communication Range: Line of sight - approx. 10 m (33')
• Frequency Band: 2.402 GHz to 2.480 GHz
• Modulation Method: GFSK, Pi/4DQPSK, 8DPSK
• Spread Spectrum Method: FHSS
• Compatible Bluetooth Profiles: A2DP, AVRCP
• Supported Codecs: SBC
• Transmission Band: 20 to 20,000 Hz

Audio Technica AT-LP60XHP-GM Fully Automatic Belt-Drive Turntable with Headphones (Gun Metal/Black)

The AT-LP60XHP turntable and headphones combination lets you enjoy your 33-1/3 and 45 RPM records with no additional equipment required. Based on the AT-LP60X fully automatic belt-drive turntable, the AT-LP60XHP adds an integrated headphone amplifier with a 3.5 mm (1/8") headphone jack and volume control on the front panel, so all you have to do is plug in the included ATH-250AV over-ear headphones (or other headphones of your choice) and start the records spinning.

• 100 to 240 V, 50/60 Hz, 0.6 A Max.

Audio Technica AT-LPW30BKR Fully Manual Belt-Drive Turntable 33/45 (Mahogany)

The AT-LPW30 is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. The two-speed (33-1/3 and 45 RPM) turntable features an aesthetically pleasing anti-resonance MDF (medium density fiberboard) plinth with black wood veneer to limit low-frequency acoustical feedback.

The turntable includes a straight aluminum tonearm with adjustable tracking force and an AT-HS4 universal ½"-mount headshell with an AT-VM95C Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 60 years, and that expertise shows in the versatile, high-performance AT-VM95C cartridge, which comes with a 0.6 mil conical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.

The AT-LPW30 is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.

Product Features

Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM

Adjustable dynamic anti-skate control

Professional anti-resonance, die-cast aluminum platter with rubber mat

AT-HS4 universal ½"-mount headshell and AT-VM95C Dual Moving Magnet phono cartridge with 0.6 mil conical stylus

AT-VM95C cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application

Straight tonearm with hydraulically damped lift control and lockable rest

Anti-resonance MDF (medium density fiberboard) plinth with black wood veneer

Built-in switchable phono pre-amplifier for phono or line-level output

AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain

Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover

Wow and Flutter< 0.15% WRMS (33RPM) at 3kHz

Signal-to-Noise Ratio> 60dB

Output LevelPre-amp: PHONO: 4.0mV nominal at 1kHz, 5cm/sec - Pre-amp: LINE: 200mV nominal at 1kHz, 5cm/sec

Phono Pre-Amp Gain35 dB nominal, RIAA equalized

Power Supply Requirements100 to 240V, 50/60Hz

Dimensions116.9 x 420.0 x 340.0 (H x W x Dmm)

Weight5 kg

Tonearm TypeStatic balanced straight aluminum pipe tonearm

Effective Arm Length223.6 mm

Overhang18.6 mm

Tracking Error Angle<2 degrees

Applicable Cartridge Weight12-17 g

Replacement StylusAT-VMN95C

NotesStylus pressure adjustment range: 0-3 g

Does NOT inlcude a color retail package. Retail package is similar to a standard shipping carton.

Audio Technica AT-LP5X Direct-Drive USB Turntable (33/45/78) (Black)

Building on Audio-Technica's analog heritage and over 50 years of Japanese audio design, the AT-LP5X features upgraded technology while keeping the contemporary style and acclaimed performance of its predecessor, the AT-LP5.

The LP5X retains the J-shaped tonearm, a design inspired by the classic Audio-Technica models of the 1960s and '70s, and features a metallic gimbal suspension system and precision bearings to mitigate tracking errors. The tonearm also includes an adjustable counterweight and anti-skate control and comes fitted with a lightweight (9.3g) AT-HS6 headshell and the black AT-VM95E Dual Moving Magnet stereo cartridge.

Constructed of anti-vibration damping materials with heavy-mass metal chassis inserts, the AT-LP5X turntable has been designed to limit low-frequency acoustical feedback. Its precision-machined, die-cast aluminum platter is powered by a direct-drive, low-noise motor, ensuring stable, on-axis rotation at 33-1/3, 45 and 78 RPM. A 5 mm thick rubber-damping mat, which isolates from low frequency feedback while providing a highly stable surface for all LP formats, tops the platter.

The AT-LP5x features a built-in switchable MM/MC phono/line preamp that enables it to connect directly to a computer, home stereo, powered speakers and other components that have no dedicated turntable input. The selection of MM/MC cartridges allow for an easy upgrade to a moving coil with additional equipment. The turntable is also equipped with a USB output for direct connection to a computer.

Product Features

Does NOT inlcude a color retail package. Retail package is similar to a standard shipping carton.

Direct-drive, low noise motor

Fully manual operation with three speeds: 33-1/3, 45 and 78 RPM

AT-VM95E Dual Moving Magnet stereo cartridge (black) with replaceable stylus

Lightweight AT-HS6 headshell

J-shaped tonearm, modeled after original Audio-Technica designs from the 1960s and '70s, is engineered to minimize tracking errors

Switchable MM/MC built-in pre-amplifier and line enables connection to components with or without a dedicated phono input

Anti-resonance, die-cast aluminum platter

Heavy rubber damping mat for improved low-frequency reproduction

AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain

Elegant matte black finish

Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, USB cable

Included dust cover and mounting hardware

• 100-240V AC, 50/60 Hz

ITEM DOES NOT HAVE A COLOR RETAIL DISPLAY BOX. Product has a brown display box with black image of the turntable and model number.

Audio Technica AT-LPW50PB Fully Manual Belt Drive Turntable Piano Black

ITEM DOES NOT HAVE A COLOR RETAIL DISPLAY BOX. Product has a brown display box with black image of the turntable and model number.

The AT-LPW50PB is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. It features an anti-resonance 30 mm thick MDF (medium density fiberboard) plinth, with a high-gloss, piano-black finish, to dampen low-frequency acoustical feedback, and a sensor-monitored motor to ensure accurate platter rotation speeds of 33-1/3 and 45 RPM.

Product Features

The turntable includes a straight, matte-finish, carbon-fiber tonearm with adjustable tracking force and an AT-HS4 universal ½"-mount headshell with a black AT-VM95E Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E cartridge, which comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of optio

The AT-LPW50PB is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.

Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM

Motor features a speed-sensor system to maintain accurate platter rotation speed

Adjustable dynamic anti-skate control

Professional anti-resonance, die-cast aluminum platter with rubber mat

AT-HS4 universal ½"-mount headshell and AT-VM95E Dual Moving Magnet phono cartridge (black) with 0.3 x 0.7 mil elliptical stylus

AT-VM95E cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application

Straight, matte-finish, carbon-fiber tonearm with hydraulically damped lift control and lockable rest

Anti-resonance 30 mm thick MDF (medium density fiberboard) plinth with high-gloss, piano-black finish

High-isolation, height-adjustable feet

AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain

Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover

Built-in switchable phono preamplifier for phono or line-level output

• 100-240 V, 50/60 Hz, 0.5 A Max.

FULLY-AUTO BELT-DRIVE TT,BLACK/BRONZE

The AT-LP70X fully automatic belt-drive turntable is designed for budding vinylphiles - those who love the engaged, real-world experience of listening to records, from flipping through albums at the record store, to placing a record on the turntable, cueing the tonearm, and sitting back with the album art in hand to enjoy warm, analog music as the artist intended.

Arguably, the most important component for generating high-fidelity audio from vinyl is a quality phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 60 years, and we've drawn on that expertise to create a versatile, high-performance cartridge for this turntable - performance that other turntables in this class simply can't match.

Integrated into the J-shaped tonearm, the AT-VM95C cartridge with 0.6 conical stylus offers excellent channel separation and low distortion for outstanding tonal quality. And the stylus can also be easily upgraded with any of the other styli (elliptical, microlinear, or Shibata) in our VM95 Series, offering customization that is normally only possible on a turntable with a detachable headshell and cartridge.

The easy-to-use AT-LP70X plays both 33-1/3 and 45 RPM records and, with its built-in switchable phono preamp, can be connected directly to a home stereo, powered speakers, computer and other components, whether they have a dedicated phono input or not. The three-piece, anti-resonance chassis provides a solid foundation that dampens unwanted noise for improved sound quality. Noise is further reduced by the inclusion of an AC adapter that moves the AC/DC conversion outside of the chassis to limit its impact on the signal chain.

The turntable comes with a detachable RCA output cable (dual RCA male to dual RCA male with ground), 45 RPM adapter, and removable hinged dust cover, and is available in three color schemes: Black/Gray, Black/Bronze, and White/Silver.

Features:

• Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
• A fixed-body AT-VM95C Integral Dual Moving MagnetT phono cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
• Stylish three-piece chassis construction dampens resonance for improved sound quality*
• J-shaped tonearm is engineered to minimize tracking errors
• Tonearm lock reduces risk of stylus damage
• Built-in switchable phono/line pre-amplifier
• Anti-resonance, die-cast aluminum platter with felt mat
• AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
• Includes detachable RCA output cable (dual RCA male to dual RCA male with ground), 45 RPM adapter, and removable hinged dust cover
• Available in Black/Gray, Black/Bronze, and White/Silver

*Compared to AT-LP60X.

Specifications:

Turntable specifications:

• Motor: DC motor
• Drive method: Belt drive
• Speed: 33-1/3 RPM, 45 RPM
• Turntable platter: Die-cast aluminum
• Wow and flutter: < 0.25% (WTD)
• Signal-to-noise ratio: > 55 dB
• Output level: PHONO: 4.0 mV nominal at 1 kHz, 5 cm/sec LINE: 252 mV nominal at 1 kHz, 5 cm/sec
• Phono pre-amp gain: 36 dB nominal, RIAA equalized

Tonearm specifications:

• Effective length: 220 mm (8.7")
• Overhang: 18 mm (0.71")
• Maximum tracking error angle: Less than 2.0°

Cartridge specifications:

(This product is equipped with an integrated AT-VM95C Dual Moving Magnet Stereo Cartridge. The cartridge cannot be removed.)

• Cartridge model: AT-VM95C
• Cartridge type: VM
• Recommended load impedance: 47,000 ohms
• Output voltage: 4.0 mV (mV at 1 kHz, 5 cm/sec)
• Stylus: 0.6 mil bonded conical
• Cantilever: Aluminum pipe

AC adapter:

• Type: FJ-SW1261200500DN
• Rated input voltage: 100 to 240 V AC
• Rated input current: 0.4 A max.
• Rated frequency: 50 Hz / 60 Hz
• Rated output voltage: 12 V DC
• Rated secondary current: 0.5 A
• Cable length: Approx. 1.5 m (4.9')

(The included AC adapter may differ depending on the country of sale. Check the rating label on the AC adapter. For details, contact your local Audio-Technica dealer.)

General specifications:

• Dimensions: 400 mm (16") x 330 mm (13") x 110 mm (4.3") (W x D x H)
• Weight: Approx. 2.9 kg (6.4 lbs)
• Power consumption: 1.5 W
• Replacement stylus (sold separately): AT-VMN95C
• Replacement belt (sold separately): AT-LP70X exclusive belt

Accessories:

• Dust cover
• Felt mat
• Platter (with drive belt)
• Dust cover hinges
• 45 RPM adapter
• RCA audio cable (Approx. 1.0 m (3.3'))
• AC adapter (Approx. 1.5 m (4.9'))

FULLY-AUTO WIRELESS BELT-DRIVE TT,BLACK/BRONZE

The AT-LP70XBT fully automatic wireless belt-drive turntable is designed for budding vinylphiles - those who love sitting back with the album art in hand to enjoy warm, analog music as the artist intended. Added Bluetoothr wireless technology gives you the option to listen to your vinyl over Bluetooth-enabled speakers, headphones, or other devices, including those that support the high-quality Qualcommr aptXT Adaptive audio codec.

Arguably, the most important component for generating high-fidelity audio from vinyl is a quality phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 60 years, and we've drawn on that expertise to create a versatile, high-performance cartridge for this turntable - performance that other turntables in this class simply can't match.

Integrated into the J-shaped tonearm, the AT-VM95C cartridge with 0.6 conical stylus offers excellent channel separation and low distortion for outstanding tonal quality. And the stylus can also be easily upgraded with any of the other styli (elliptical, microlinear, or Shibata) in our VM95 Series, offering customization that is normally only possible on a turntable with a detachable headshell and cartridge.

The easy-to-use AT-LP70XBT plays both 33-1/3 and 45 RPM records and, in addition to its Bluetooth wireless technology, has a built-in switchable phono preamp that allows the turntable to also be connected directly to a home stereo, powered speakers, computer or other component, whether that component has a dedicated phono input or not. The three-piece, anti-resonance chassis provides a solid foundation that dampens unwanted noise for improved sound quality. Noise is further reduced by the inclusion of an AC adapter that moves the AC/DC conversion outside of the chassis to limit its impact on the signal chain.

The turntable comes with a detachable RCA output cable (dual RCA male to dual RCA male with ground), 45 RPM adapter, and removable hinged dust cover, and is available in three color schemes: Black/Silver, Black/Bronze, and White/Silver.

Features:

• Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
• High-fidelity audio with Bluetooth wireless technology
• Connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology or to wired audio systems and powered speakers via included dual RCA output cable
• Compatible with the high-quality Qualcommr aptXT Adaptive audio codec
• A fixed-body AT-VM95C Integral Dual Moving MagnetT phono cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
• Stylish three-piece chassis construction dampens resonance for improved sound quality*
• J-shaped tonearm is engineered to minimize tracking errors
• Tonearm lock reduces risk of stylus damage
• Built-in switchable phono/line pre-amplifier
• Anti-resonance, die-cast aluminum platter with felt mat
• AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
• Includes detachable RCA output cable (dual RCA male to dual RCA male with ground), 45 RPM adapter, and removable hinged dust cover
• Available in Black/Silver, Black/Bronze, and White/Silver

*Compared to AT-LP60X.

Specifications:

Communication specifications:

• Communication system: Bluetooth version 5.2
• RF output: 2.5 mW EIRP
• Maximum communication range: Line of sight - approx. 10 m (33')
• Frequency band: 2.402 GHz to 2.480 GHz
• Modulation method: GFSK, Pi/4DQPSK, 8DPSK
• Compatible Bluetooth profile: A2DP
• Supported codec: Qualcommr aptXT Adaptive audio, Qualcommr aptXT audio, SBC

Turntable specifications:

• Motor: DC motor
• Drive method: Belt drive
• Speed: 33-1/3 RPM, 45 RPM
• Turntable platter: Die-cast aluminum
• Wow and flutter: < 0.25% (WTD)
• Signal-to-noise ratio: > 55 dB
• Output level: PHONO: 4.0 mV nominal at 1 kHz, 5 cm/sec LINE: 252 mV nominal at 1 kHz, 5 cm/sec
• Phono pre-amp gain: 36 dB nominal, RIAA equalized

Tonearm specifications:

• Effective length: 220 mm (8.7")
• Overhang: 18 mm (0.71")
• Maximum tracking error angle: Less than 2.0°

Cartridge specifications:

(This product is equipped with an integrated AT-VM95C Dual Moving Magnet Stereo Cartridge. The cartridge cannot be removed. )

• Cartridge model: AT-VM95C
• Cartridge type: VM
• Recommended load impedance: 47,000 ohms
• Output voltage: 4.0 mV (mV at 1 kHz, 5 cm/sec)
• Stylus: 0.6 mil bonded conical
• Cantilever: Aluminum pipe

AC adapter:

• Type: FJ-SW1261200500DN
• Rated input voltage: 100 to 240 V AC
• Rated input current: 0.4 A max.
• Rated frequency: 50 Hz / 60 Hz
• Rated output voltage: 12 V DC
• Rated secondary current: 0.5 A
• Cable length: Approx. 1.5 m (4.9')

(The included AC adapter may differ depending on the country of sale. Check the rating label on the AC adapter. For details, contact your local Audio-Technica dealer.)

General specifications:

• Dimensions 400 mm (16") x 330 mm (13") x 110 mm (4.3") (W x D x H)
• Weight Approx. 2.9 kg (6.4 lbs)
• Power consumption 1.6 W
• Replacement stylus (sold separately): AT-VMN95C
• Replacement belt (sold separately): AT-LP70X exclusive belt

Accessories:

• Dust cover
• Felt mat
• Platter (with drive belt)
• Dust cover hinges
• 45 RPM adapter
• RCA audio cable (Approx. 1.0 m (3.3'))
• AC adapter (Approx. 1.5 m (4.9'))

FULLY-AUTO WIRELESS BELT-DRIVE TT,BLACK/SILVER

The AT-LP70XBT fully automatic wireless belt-drive turntable is designed for budding vinylphiles - those who love sitting back with the album art in hand to enjoy warm, analog music as the artist intended. Added Bluetoothr wireless technology gives you the option to listen to your vinyl over Bluetooth-enabled speakers, headphones, or other devices, including those that support the high-quality Qualcommr aptXT Adaptive audio codec.

Arguably, the most important component for generating high-fidelity audio from vinyl is a quality phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 60 years, and we've drawn on that expertise to create a versatile, high-performance cartridge for this turntable - performance that other turntables in this class simply can't match.

Integrated into the J-shaped tonearm, the AT-VM95C cartridge with 0.6 conical stylus offers excellent channel separation and low distortion for outstanding tonal quality. And the stylus can also be easily upgraded with any of the other styli (elliptical, microlinear, or Shibata) in our VM95 Series, offering customization that is normally only possible on a turntable with a detachable headshell and cartridge.

The easy-to-use AT-LP70XBT plays both 33-1/3 and 45 RPM records and, in addition to its Bluetooth wireless technology, has a built-in switchable phono preamp that allows the turntable to also be connected directly to a home stereo, powered speakers, computer or other component, whether that component has a dedicated phono input or not. The three-piece, anti-resonance chassis provides a solid foundation that dampens unwanted noise for improved sound quality. Noise is further reduced by the inclusion of an AC adapter that moves the AC/DC conversion outside of the chassis to limit its impact on the signal chain.

The turntable comes with a detachable RCA output cable (dual RCA male to dual RCA male with ground), 45 RPM adapter, and removable hinged dust cover, and is available in three color schemes: Black/Silver, Black/Bronze, and White/Silver.

Features:

• Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
• High-fidelity audio with Bluetooth wireless technology
• Connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology or to wired audio systems and powered speakers via included dual RCA output cable
• Compatible with the high-quality Qualcommr aptXT Adaptive audio codec
• A fixed-body AT-VM95C Integral Dual Moving MagnetT phono cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
• Stylish three-piece chassis construction dampens resonance for improved sound quality*
• J-shaped tonearm is engineered to minimize tracking errors
• Tonearm lock reduces risk of stylus damage
• Built-in switchable phono/line pre-amplifier
• Anti-resonance, die-cast aluminum platter with felt mat
• AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
• Includes detachable RCA output cable (dual RCA male to dual RCA male with ground), 45 RPM adapter, and removable hinged dust cover
• Available in Black/Silver, Black/Bronze, and White/Silver

*Compared to AT-LP60X.

Specifications:

Communication specifications:

• Communication system: Bluetooth version 5.2
• RF output: 2.5 mW EIRP
• Maximum communication range: Line of sight - approx. 10 m (33')
• Frequency band: 2.402 GHz to 2.480 GHz
• Modulation method: GFSK, Pi/4DQPSK, 8DPSK
• Compatible Bluetooth profile: A2DP
• Supported codec: Qualcommr aptXT Adaptive audio, Qualcommr aptXT audio, SBC

Turntable specifications:

• Motor: DC motor
• Drive method: Belt drive
• Speed: 33-1/3 RPM, 45 RPM
• Turntable platter: Die-cast aluminum
• Wow and flutter: < 0.25% (WTD)
• Signal-to-noise: ratio > 55 dB
• Output level: PHONO: 4.0 mV nominal at 1 kHz, 5 cm/sec LINE: 252 mV nominal at 1 kHz, 5 cm/sec
• Phono pre-amp gain: 36 dB nominal, RIAA equalized

Tonearm specifications:

• Effective length: 220 mm (8.7")
• Overhang: 18 mm (0.71")
• Maximum tracking error angle: Less than 2.0°

Cartridge specifications:

(This product is equipped with an integrated AT-VM95C Dual Moving Magnet Stereo Cartridge. The cartridge cannot be removed. )

• Cartridge model: AT-VM95C
• Cartridge type: VM
• Recommended load impedance: 47,000 ohms
• Output voltage: 4.0 mV (mV at 1 kHz, 5 cm/sec)
• Stylus: 0.6 mil bonded conical
• Cantilever: Aluminum pipe

AC adapter:

• Type: FJ-SW1261200500DN
• Rated input voltage: 100 to 240 V AC
• Rated input current: 0.4 A max.
• Rated frequency: 50 Hz / 60 Hz
• Rated output voltage: 12 V DC
• Rated secondary current: 0.5 A
• Cable length: Approx. 1.5 m (4.9')

(The included AC adapter may differ depending on the country of sale. Check the rating label on the AC adapter. For details, contact your local Audio-Technica dealer.)

General specifications:

• Dimensions 400 mm (16") x 330 mm (13") x 110 mm (4.3") (W x D x H)
• Weight Approx. 2.9 kg (6.4 lbs)
• Power consumption 1.6 W
• Replacement stylus (sold separately): AT-VMN95C
• Replacement belt (sold separately): AT-LP70X exclusive belt

Accessories:

• Dust cover
• Felt mat
• Platter (with drive belt)
• Dust cover hinges
• 45 RPM adapter
• RCA audio cable (Approx. 1.0 m (3.3'))
• AC adapter (Approx. 1.5 m (4.9'))

FULLY-AUTO BELT-DRIVE TT,BLACK/GREY

The AT-LP70X fully automatic belt-drive turntable is designed for budding vinylphiles - those who love the engaged, real-world experience of listening to records, from flipping through albums at the record store, to placing a record on the turntable, cueing the tonearm, and sitting back with the album art in hand to enjoy warm, analog music as the artist intended.

Arguably, the most important component for generating high-fidelity audio from vinyl is a quality phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 60 years, and we've drawn on that expertise to create a versatile, high-performance cartridge for this turntable - performance that other turntables in this class simply can't match.

Integrated into the J-shaped tonearm, the AT-VM95C cartridge with 0.6 conical stylus offers excellent channel separation and low distortion for outstanding tonal quality. And the stylus can also be easily upgraded with any of the other styli (elliptical, microlinear, or Shibata) in our VM95 Series, offering customization that is normally only possible on a turntable with a detachable headshell and cartridge.

The easy-to-use AT-LP70X plays both 33-1/3 and 45 RPM records and, with its built-in switchable phono preamp, can be connected directly to a home stereo, powered speakers, computer and other components, whether they have a dedicated phono input or not. The three-piece, anti-resonance chassis provides a solid foundation that dampens unwanted noise for improved sound quality. Noise is further reduced by the inclusion of an AC adapter that moves the AC/DC conversion outside of the chassis to limit its impact o

The turntable comes with a detachable RCA output cable (dual RCA male to dual RCA male with ground), 45 RPM adapter, and removable hinged dust cover, and is available in three color schemes: Black/Gray, Black/Bronze, and White/Silver.

Features:

• Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
• A fixed-body AT-VM95C Integral Dual Moving MagnetT phono cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
• Stylish three-piece chassis construction dampens resonance for improved sound quality*
• J-shaped tonearm is engineered to minimize tracking errors
• Tonearm lock reduces risk of stylus damage
• Built-in switchable phono/line pre-amplifier
• Anti-resonance, die-cast aluminum platter with felt mat
• AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
• Includes detachable RCA output cable (dual RCA male to dual RCA male with ground), 45 RPM adapter, and removable hinged dust cover
• Available in Black/Gray, Black/Bronze, and White/Silver

*Compared to AT-LP60X.

Specifications:

Turntable specifications:

• Motor: DC motor
• Drive method: Belt drive
• Speed: 33-1/3 RPM, 45 RPM
• Turntable platter: Die-cast aluminum
• Wow and flutter: < 0.25% (WTD)
• Signal-to-noise ratio: > 55 dB
• Output level: PHONO: 4.0 mV nominal at 1 kHz, 5 cm/sec LINE: 252 mV nominal at 1 kHz, 5 cm/sec
• Phono pre-amp gain: 36 dB nominal, RIAA equalized

Tonearm specifications:

• Effective length: 220 mm (8.7")
• Overhang: 18 mm (0.71")
• Maximum tracking error angle: Less than 2.0°

Cartridge specifications:

(This product is equipped with an integrated AT-VM95C Dual Moving Magnet Stereo Cartridge. The cartridge cannot be removed.)

• Cartridge model: AT-VM95C
• Cartridge type: VM
• Recommended load impedance: 47,000 ohms
• Output voltage: 4.0 mV (mV at 1 kHz, 5 cm/sec)
• Stylus: 0.6 mil bonded conical
• Cantilever: Aluminum pipe

AC adapter:

• Type: FJ-SW1261200500DN
• Rated input voltage: 100 to 240 V AC
• Rated input current: 0.4 A max.
• Rated frequency: 50 Hz / 60 Hz
• Rated output voltage: 12 V DC
• Rated secondary current: 0.5 A
• Cable length: Approx. 1.5 m (4.9')

(The included AC adapter may differ depending on the country of sale. Check the rating label on the AC adapter. For details, contact your local Audio-Technica dealer.)

General specifications:

• Dimensions 400 mm (16") x 330 mm (13") x 110 mm (4.3") (W x D x H)
• Weight Approx. 2.9 kg (6.4 lbs)
• Power consumption 1.5 W
• Replacement stylus (sold separately): AT-VMN95C
• Replacement belt (sold separately): AT-LP70X exclusive belt

Accessories:

• Dust cover
• Felt mat
• Platter (with drive belt)
• Dust cover hinges
• 45 RPM adapter
• RCA audio cable (Approx. 1.0 m (3.3'))
• AC adapter (Approx. 1.5 m (4.9'))